Portails Coupe-Feu

Les portails à glissement horizontal coupe-feu sont des fermetures conformes aux normes pour séparer en toute sécurité les zones d’un parking ou les espaces ayant l’obligation de compartimenter en cas d’incendie.

    Demander un devis

    Laissez-nous vos données et vous serez contacté par notre agent local pour recevoir un devis ad hoc pour vos besoins.











    Pour les portes industrielles



    Les promotions applicables à votre devis sont limitées, périodiques et si elles ne sont pas cliquables cela signifie qu’elles sont terminées. 1 mois de validité avec 1 promo uniquement applicable sur demande. Aucune contrainte d’achat.

    Description

    Fiche technique

    Structure

    Sizing

    Width up to 5400 mm x Height up to 5000 mm

    Leaf door

    Made of continuous modules of honeycomb panels in steel plate insulated with insulating materials (the thickness varies depending on
    the degree of fire protection).

    Leaf door thickness

    80 mm for EI 120, 120 mm for EI 180

    Assembly

    Screws on prepared horizontal tubes

    Finishing

    • Base coat: Applied with curing in the oven at a temperature of 160 ºC
    • Painting: Suitable for interior door use

    Functioning

    Sliding fire door with thermal fuse

    • Opening and closing mode: The operator manually opens and closes the door
    • Thermal fuse: Subjected to temperatures above 70 ºC, snaps causing the release of the rope
    • Counterweight: Drag the door to the lock
    • Stroke brake: Prevents acceleration of the door when closing
    • Shock absorber: Cushions the impact of the door closure

    Sliding fire door equipped with electromagnet

    • Opening and closing mode: The counterweight continuously charges the door that normally remains open, held by the electromagnet
    • Disconnection: The electromagnet is deactivated by the ECU pulse or by pressing the disconnect button
    • Counterweight: Closes the door when the electromagnet is switched off
    • Stroke brake: Prevents acceleration of the door when closing
    • End of stroke shock absorber: Cushions the impact of the door closing
    • Electrical connection: The electromagnet requires a connection to a power supply unit and its external smoke and heat detectors

    Other

    Sliding guides

    Horizontal slide made of pressed and pre-drilled steel sheet for fixing with dowels.

    Flow characteristics

    Sliding on low friction trolleys

    Sliding guide to the floor

    Ensures the perpendicularity of the door leaf

    Coverage of the upper rail

    Motor cover in pressed steel sheet

    “Labirinti”

    Made of pressed steel sheet

    Inflatable trimming

    Applied on all labyrinths and under the door

    Closing counterweight

    Adjustable and protected by a housing in pressed steel sheet, with counter-rebate

    Handles

    Flush mounting on both sides

    Label

    Applied directly on the handle

    Demandes particulières

    As-tu besoin d’une option spéciale ?

    Connecte-toi ou crée un compte

    Découvre toutes les caractéristiques de ce produit logistique pour savoir s’il est le choix approprié pour ton entreprise.

    Dessins

    portone tagliafuoco - glg doors

    Brochure

    Portails Coupe-Feu

    Télécharger la présentation de notre portails coupe-feu

    Pourquoi donc choisir cette portail ?

    1. Sécurité et protection

    Les portails rigides coupe-feu offrent une résistance au feu élevée et peuvent servir de barrière de protection en cas d’incendie. Ils sont conçus pour résister à la chaleur et aux flammes pendant une période de temps déterminée, consentir aux personnes d’évacuer en sécurité et limiter la diffusion du feu à l’intérieur d’un bâtiment.

    2. Conformité aux normes

    L’installation de portails rigides coupe-feu respectant les normes en vigueur garantit la conformité aux réglementations de sécurité anti-incendie. Ces portails sont conçus et testés pour satisfaire des standards de résistance au feu spécifiques, comme la classe de résistance au feu et le temps de résistance. L’achat d’un portail rigide coupe-feu garantit la conformité aux normes de sécurité et peut être demandé pour obtenir les autorisations nécessaires.

    3. Versatilité et durée

    Les portails rigides coupe-feu sont disponibles en différentes dimensions, formes et configurations pour s’adapter aux exigences spécifiques du bâtiment. Ils peuvent être réalisés sur mesure pour s’adapter à des espaces de grandes dimensions et peuvent être conçus avec différentes options d’ouverture, comme des portes coulissantes, battantes ou pliantes. Ces portails sont réalisés avec des matériaux résistants au feu et conçus pour résister aux sollicitations et à l’usure dans le temps, en offrant une solution solide et durable pour la protection anti-incendie.

    Avis clients

    Avis

    Il n'y a pas encore de commentaires sur le produit.

    Afficher uniquement les commentaires en Français ()

    Soyez le premier à donner votre avis “Portails Coupe-Feu”